Do you have a bedroom that could use a ceiling fan to cool it down Its certainly not hard to install a ceiling fan by yourself if you are preparing to replace a light fixture. Most of the wires will already be around, therefore the only obstacle will be replacing the pre-existing workbox with one that is approved for the weight of a ceiling fan. Hanging your new ceiling fan on an established box that won't support the extra weight of the fan could lead to disaster. Right before you do anything, read the instructions for your fan very cautiously and make sure you have the necessary tools.

Should you decide to have the fan on a cathedral ceiling, you must acquire an extension so the fan wont be so high up. As soon as you have everything ready to go, the very first thing you should do is make sure that the breaker is turned off so no power goes to the light fixture woodworking plans. Anytime you take out the light fixture, examine to see if the current workbox can hold the increased weight. Nearly all workboxes are not designed for ceiling fans, you will need extra support. Including support to the workbox is not that tough if you have admittance to the light fixture from the attic.

To add support, you only need to nail a 2x4 in between the ceiling rafters in order that it touches the top of the workbox. The moment the 2x4 is properly anchored, prop the workbox to the 2x4. If you did it accurately, the body weight of the fan must be effectively supported by the 2x4 wood and screws. If you dont have access to the attic, you will have to place a cross bracing in your ceiling. Performing this is more of a challenge and may not be as reliable as using a 2x4 but it is the most suitable you can do if you dont possess access to the attic.

Now, after setting up the fan based on the instructions, you are prepared to place any fan. The task is to keep the fan while attaching the wiring. Relying on the fan, many come with a hanging frame, and others include a bracket with a J hook that lets you hang the motor housing. The majority of fans, you will find a wall mount switch using a chain to regulate the speed of the fan. If you also establish a light kit with the fan, the two can be monitored by a wall switch or chain.

The next step is to follow the wiring guidelines which are as basic as connecting two white wires, two black wires and two ground wires. woodworking blueprints Now all you need to do is finish assembling the fan according to the directions, by attaching the fan blades. Right after you install the blades, the only thing left is to change the breaker back on to see if you did it right.